New Products

INCLUDES New Acrylic replacement print with self adhesive

 This is a designed marquee for your arcade 1up 

•  This is a simple swap out process no adhesive or removing of old print.
• You will need to loosen an remove one side of cabinet to access marquee on this title. 

This is not just a vinyl decal this is new reverse printed Acrylic.

 With zero color washout,  colors stay true and vibrant lighted or not lighted.

 https://www.szabosarcades.com/products/new-arcade-1up-slip-on-replacement-acrylic-marquees 

All of these have been rescaled to fit Arcade 1Up  from years of reproducing arcade art. All of these are from original full size cabinet files that I have spent endless hours on redoing each an every single marquee for accurate arcade reproductions

This is a custom designed Terminator Topper. 

 Dimensions for this are 10 1/2" H x 17 1/2" W

Acrylic with backlight for the ultimate finishing touch!

With super easy installation. No tools required.

*Cabinet not included 

This entire art package was scanned from original cabinet. These are extremely rare in the arcade world. Here at Szabo’s I am the only one in the industry that has redone the entire art package. I now have converted it over for the Arcade1up community.

this is just for the vinyl prints no cabinet or riser included. If you have a lighted marquee that is the translite option you want.

kit will include following

Marquee

bezel decal

CPO decal

both sides and front

3 sides for riser  

This entire art package was scanned from original cabinet. These are extremely rare in the arcade world. Here at Szabo’s I am the only one in the industry that has redone the entire art package. I now have converted it over for the Arcade1up community.

this is just for the vinyl prints no cabinet or riser included. If you have a lighted marquee that is the translite option you want.

kit will include following

3 sides for riser  

Szabo’s exclusive a mashup of original so turtles and turtles in time. Original art scanned from NOS arcade artwork that I use on the full size Konami restorations.

this is available in vinyl or translite.

This piece of art I scanned from an original New Old Stock cardboard topper. When the Turtles in time game was released in 1991. They had these in cardboard to attach to top of the cabinet to draw attention to the newly released game! I took this a step further now reverse printing on Acyrlic for a more durable premium option. This is designed fit a Arcade 1up size cabinet and attaches in under a minute. 

This is for art only does not include riser.

Xmen themed art goes with my full Xmen Arcade 1up kit (sold separately)

printed on bubble free vinyl with easy application with satin over laminate.

cut to size only need to trim for the front where it dips down.

Scanned from original marquee, I completely redid the art in vector form recreating the marquee. This has only designated areas that light like original did.

This is to match original colors and specs, this will also fit dimensions of a Stargate if your converting one.

Control panel overlay with polycarbonate laminate

Now offering a premium laminate, reverse printed with a lexan velvet finish.

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

This is a Szabos Arcades exclusive products, custom cdeaigned. Y Bobby Jones for the VS Castelvania. This will fit standard Vs Nintendo Cabinet.

Reverse print with 3m adhesive

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

This is a Szabos Arcades exclusive product,  custom designed by Bobby Jones for Castlevania bezel.

This is printed on 3/16" smoked acyrlic.

Designed to fit standard Nintendo cabinets.

This is a Szabo’s exclusive custom designed marquee by Bobby Jones for the classic Nintendo Castlevania.

reverse printed on 1/8" clear acrylic.

sized for a standard Nintendo cabinet.

This is a Szabos Arcades exclusive products designed by Bobby Jones.

This is for the complete Castlevania Nintendo art set.

Reverse printed Marquee

Tinted reverse printed 3/16" Bezel

Polycarbonate CPO

Satin Die-cut side art 

instruction Card included

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

This is a Szabos Arcades exclusive custom designed By Bobby Jones, this is for the standard Nintendo cabinets.  

This is die-cut and printed on bubble free vinyl for easy application.

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Made to fit original Atari centipede cabinet.

acrylic reverse printed.

Printed only polycarbonate with 3m double sided adhesive this is not a laminate.

Now offering a premium laminate, reverse printed with a lexan velvet finish.

marquee sold separately 

Reverse printed with 3m adhesive

Marquee sold separately 

Die-cut with satin laminate this includes both sides upper an lower panels.

This was recreated for the back seat of the Crazy Taxi sit down arcade, these where notorious for peeling on the original cabinets. Also included is the decal behind the back seat. 
printed on 3m air release vinyl with Satin laminate.

 My own custom designed topper for Cuphead, in the photos this topper is setup for speakers to be installed in rear will also have an option without that.

made from 1/8” Acrylic reverse printed

This is a Custom designed bezel for full size original Nintendo cabinets. Print is on smoked plexi for keeping true to Nintendo’s bezel style.  

New 3/4” MDF control panel with included reverse printed Acrylic overlay. All holes and t-molding slot done for you, simple put new hardware on an your all set. No graphics to apply.

This piece of art I scanned from an original New Old Stock cardboard topper. When the Turtles in time game was released in 1991. They had these in cardboard to attach to top of the cabinet to draw attention to the newly released game! I took this a step further now reverse printing on Acyrlic for a more durable premium option. This is designed for the full size cabinet and attaches in under a minute. 

This was a collaboration between Galloping Ghost reproductions and myself to make a accurate reproduction available to the community.

this is reverse printed and has 3m double sided adhesive for application. This will fit the original cabinet specs.

control panel not included just the overlay.

This is the front decal for the 2020 Golden Tee pedestal arcade machine.

10" X 8.5"

Laminated with satin printed on bubble free vinyl, and die-cut.

This is custom designed house of dead 1 art kit.

This does NOT include the marquee.

following items included:

-both sides upper and lower

-control panel decals including following:

                 * Agents 1-2  and Player 1-2

-Instructions.

All printed on bubble free vinyl with satin laminate.

Killer Instinct artwork scaled properly for the new 30th anniversary cabinet. This is one piece to include the small added extension on the new cabinets.  

This also includes box art for both sides and front to match original cabinets.

also 3 piece riser art. Have two options of art for that.

Control panel overlay.

Marquee sold separately.

Also coming soon moves bezel and we already have the topper available now.

New 3/4” MDF control panel with included reverse printed Acyrlic overlay. All holes and t-molding slot done for you, simple put new hardware on an your all set. No graphics to apply.

at the moment I have the following titles to choose from.

The Simpsons

Tmnt

Turtles in time

Xmen

Customize your Legends Ultimate with this one of a kind Szabo’s exclusive custom art package with a Stranger Things theme.

When selecting your model, look on the back of your machine.  

For the newer machines, HA8802 and HA8802D, if there is a letter, please select the option 01S.  Cabinets without letters, select the 01.  

Kit includes following.

1. New reverse printed marquee on acrylic. (Depends on if you select with or with our marquee)

Also, Marquee Topper option also available (not included in this kit)

https://www.szabosarcades.com/products/legends-ultimate-stranger-things-marquee-topper

2. New control panel overlay reverse printed on acrylic and die cut.

3. Bezel with new acrylic to go over existing bezel.

4. Both full sides

5. Front lower and below control panel decals, and speaker grill.

 All prints are die-cut and have bubble free easy apply technology with laminate for years of lasting protection.

Customize your Legends Ultimate with this one of a kind Szabo’s exclusive custom art themed with Stranger Things.  

this is for Bezel only all other art sold separately.

 Bezel with new acrylic to go over existing bezel.

When selecting your model, look on the back of your machine.  

Cabinet not included this is for art only.

Customize your Legends Ultimate with this one of a kind Szabo’s exclusive custom art package for Street Fighter 4.  

Kit includes following.

New reverse printed marquee on acrylic.

new control panel overlay reverse printed on acrylic and diecut.

Bezel with new acrylic to go over existing bezel.

Both full sides

Front lower and below control panel decals.

 When selecting your model, look on the back of your machine.  

For the newer machines, HA8802 and HA8802D, if there is a letter, please select the option 01S.  Cabinets without letters, select the 01.  

All prints are die-cut and have bubble free easy apply technology with laminate for years of lasting protection.

Customize your Legends Ultimate with this one of a kind Szabo’s exclusive custom art package for Street Fighter 4.  

When selecting your model, look on the back of your machine.  

Bezel with new acrylic to go over existing bezel.

Customize your Legends Ultimate with this one of a kind Szabo’s exclusive custom art package for Street Fighter 4.  

 When selecting your model, look on the back of your machine.  

  new control panel overlay reverse printed on acrylic and diecut.